AS/NZS 5369 Audit-Ready • TGA Compliant • ADA-Aligned
Exclusive distributor of ALPRO Medical GmbH in Australia and New Zealand
Contact
Home
Resource centreDocumentsTraining centre Compliance Research About us Contact
ALCOHOL-FREE CLASS IIB WIPES — BEST IN CLASS PERFORMANCE, EFFECTIVENESS WITH A 2-IN-ONE ACTION BENEFIT

PlastiSept eco Jumbo Wipes

REF 4625 · 2 tubs + 2 refill bags | REF 4624 · 12 refill bags | ARTG 293206

ALCOHOL-FREE CLASS IIB WIPES — BEST IN CLASS PERFORMANCE, EFFECTIVENESS WITH A 2-IN-ONE ACTION BENEFIT

COTTON-SOFT. CLINICALLY TOUGH. 2-in-1 Class IIB Cleaning and Disinfection

FEEL THE QUALITY. SEE THE COVERAGE. VALUE EVERY WIPE.

MORE COVERAGE. FEWER WIPES. BETTER VALUE.

Soft cotton-touch material. Generous jumbo dimensions. High liquid absorption. Validated alcohol-free cleaning and disinfection.

Why settle for small, rough wipes that dry out too quickly or need frequent replacement?

PlastiSept eco Jumbo Wipes combine an exceptionally soft, cotton-touch wiping experience with high liquid absorption and validated alcohol-free cleaning and disinfection.

Their generous 21 × 26 cm format and 50 g/m² absorbent wipe material are designed to support efficient wiping across compatible dental equipment, sensitive upholstery and other medical-device surfaces.

The result is a premium wipe that feels softer in the hand, offers generous working area and may reduce the number of wipes needed for routine surface treatment — while maintaining the required disinfectant contact time.

SOFT ON SURFACES. TOUGH ON MICROBES. SMARTER ON COST.

PlastiSept eco Jumbo Wipe
  • REF 4625 2 tubs + 2 refill bags
  • REF 4624 12 refill bags

KEY FACTS — Why practices choose PlastiSept eco JumboWipes

  • 1. PROFESSIONAL CLEANING + DISINFECTION — ONE WIPE, TWO FUNCTIONS

    PlastiSept eco combines cleaning action with antimicrobial disinfection in one ready-to-use wipe. Its formulation is designed for compatible medical-device surfaces, not simply general-purpose environmental cleaning.

    THE BENEFIT: A streamlined surface hygiene procedure, with fewer separate products where the validated instructions permit combined cleaning and disinfection.

  • 2. TESTED ANTIMICROBIAL EFFICACY — NOT JUST A CLEAN-LOOKING SURFACE

    The manufacturer's JumboWipes 50 information documents bactericidal, yeasticidal, tuberculocidal and enveloped-virus activity in five minutes under specified test conditions, including EN 13727, EN 13624, EN 14348, EN 16615, EN 14476 and EN 16777.

    THE BENEFIT: A defined, tested antimicrobial spectrum with clear contact-time requirements, rather than relying on appearance or fragrance as an indication of hygiene.

  • 3. NO ALCOHOL. NO QACs. NO ALDEHYDES. NO PHENOLS.

    Based on secondary and tertiary alkylamines, PlastiSept eco provides an alternative to common alcohol- or QAC-based disinfectant formulations.

    THE BENEFIT: Effective hygiene with chemistry selected for compatibility with sensitive medical-device surfaces.

  • 4. PROTECT SENSITIVE DENTAL EQUIPMENT — NOT JUST THE PATIENT ENVIRONMENT

    Suitable for specified compatible surfaces such as dental-chair upholstery, headrests, acrylic glass, treatment units, suspension tables and X-ray equipment. Alcohol-free chemistry avoids exposing susceptible materials to alcohol-related stress.

    THE BENEFIT: Support long-term equipment care and reduce unnecessary chemical exposure to delicate surfaces.

  • 5. EFFECTIVE CLEANING THROUGH MICROPORE TECHNOLOGY

    The manufacturer describes micropore technology as a feature supporting the wipe's cleaning performance, with effective dispensing of the active solution.

    THE BENEFIT: The wiping material contributes to physical soil removal while distributing the cleaning and disinfecting solution.

  • 6. PREMIUM COTTON TOUCH — EXCEPTIONALLY SOFT, STRONG AND TEAR-RESISTANT

    The 50 g/m² nonwoven material combines Cotton Touch softness with a robust wiping structure.

    THE BENEFIT: Comfortable handling and practical durability during daily cleaning of compatible equipment.

  • 7. JUMBO FORMAT — GENEROUS WORKING AREA

    Each wipe measures 21 × 26 cm, providing 546 cm² of physical sheet area. The generous dimensions are intended for efficient wiping of larger surfaces.

    THE BENEFIT: Potentially fewer wipe changes during appropriate routine tasks, subject to adequate wetting and infection-control requirements.

  • 8. HIGH ABSORPTION AND CONTROLLED SOLUTION DISTRIBUTION

    The premium nonwoven material is designed to hold and dispense the PlastiSept eco solution effectively.

    THE BENEFIT: Practical surface wetting and solution distribution, without suggesting that a single wipe can disinfect an unlimited area.

  • 9. READY TO USE — SIMPLER DAILY HYGIENE

    Pre-saturated wipes eliminate the need for staff to dilute or manually prepare a disinfectant solution.

    THE BENEFIT: Convenient handling and easier standardisation of routine surface hygiene, while respecting required contact times.

  • 10. REMANENCE EFFECT — AN ADDITIONAL FORMULATION BENEFIT

    The Australian PlastiSept eco summary describes residual antimicrobial activity that may inhibit microbial recontamination after treatment.

    THE BENEFIT: A potential additional benefit beyond the initial disinfection event. It does not replace scheduled disinfection.

  • 11. REFILLABLE SYSTEM — PRACTICAL AND ECONOMICAL

    Available as a starter set with two dispenser tubs and two 70-wipe refill bags, or cartons of twelve 70-wipe refills.

    THE BENEFIT: Straightforward replenishment, less need to purchase new rigid dispenser tubs, and predictable stock management.

  • 12. PREMIUM PERFORMANCE WITH A FOCUS ON COST PER TASK

    Cotton Touch material, micropore cleaning technology, solution delivery and generous sheet dimensions work together to support efficient wiping.

    THE BENEFIT: Potentially attractive cost per completed cleaning-and-disinfection task.

  • REF 4625 2 tubs + 2 refill bags
  • REF 4624 12 refill bags

ONE WIPE. MORE TO WORK WITH.

21 × 26
cm wipe dimensions
546
cm² physical sheet area
50
g/m² wipe material

COTTON-TOUCH COMFORT. GENEROUS COVERAGE.

Sheet area is not the same as validated disinfection coverage. Actual coverage depends on solution loading, surface characteristics and required wet-contact time.

Efficient coverage, simple routine

2 JUMBO WIPES. ONE DENTAL CHAIR.

For routine cleaning and disinfection, approximately 2 PlastiSept eco Jumbo Wipes will normally be sufficient to treat the accessible surfaces of a dental chair, depending on chair design, surface area and contamination.

THE BENEFIT: Efficient wipe consumption, less unnecessary waste and a practical, repeatable hygiene routine between patients.

How to use

How to use — Clean systematically. Protect against cross-contamination.

TOP TO BOTTOM. CLEAN TO DIRTY.

A consistent routine for cleaning and disinfecting compatible dental-chair surfaces.

  1. 1.

    Start at the top.

    Begin with the upper, less-contaminated surfaces, following the chair manufacturer's cleaning instructions.

  2. 2.

    Work from cleaner to dirtier areas.

    Progress systematically towards frequently touched or more contaminated surfaces, such as controls, armrests and lower chair sections.

  3. 3.

    Use overlapping, one-directional strokes.

    Wipe methodically to avoid missing areas and spreading contamination back onto already cleaned surfaces.

  4. 4.

    Change wipes when necessary.

    Use a fresh wipe when the previous one becomes dry, visibly soiled or when moving between areas where reuse could cause cross-contamination.

  5. 5.

    Respect the contact time.

    Ensure every treated surface remains sufficiently wet for the full disinfection time stated in the current PlastiSept eco JumboWipes instructions.

THE GOLDEN RULE: CLEAN FROM TOP TO BOTTOM, FROM CLEANER TO DIRTIER — NEVER BRING CONTAMINATION BACK.

This sequence is consistent with published healthcare cleaning guidance, including Queensland Health and CDC recommendations.

WEEKLY EQUIPMENT CARE — PlastiSept eco Jumbo Wipes

FIVE MINUTES ON FRIDAY. BETTER EQUIPMENT CARE ALL WEEK.

REMOVE THE BUILD-UP. PRESERVE THE FINISH. PROTECT YOUR INVESTMENT.

Even with regular daily cleaning, small amounts of detergent residue, oils, cosmetic products and other deposits may gradually accumulate on dental-chair upholstery and equipment surfaces.

We recommend a thorough supplementary wipe-down at least once per week, preferably on Friday evening after the last patient, when the dental chair is no longer in use.

THE FRIDAY END OF DAY CLEANING ROUTINE

  1. 1.

    PREPARE A GENTLE CLEANING SOLUTION

    Use warm, not hot, water with a small drop of mild dishwashing detergent, provided this is permitted by the dental-chair and surface manufacturer's cleaning instructions.

  2. 2.

    USE A SOFT MICROFIBRE CLOTH

    Lightly dampen a clean, soft microfibre cloth. Avoid soaking the material or allowing liquid to enter seams, switches or electrical components.

  3. 3.

    WIPE FROM TOP TO BOTTOM — CLEANER TO DIRTIER

    Systematically clean compatible upholstery, headrests, armrests and accessible equipment surfaces to help remove accumulated residues, oils and surface deposits.

  4. 4.

    REMOVE ANY REMAINING DETERGENT FILM

    Where permitted, wipe again with a separate cloth lightly dampened with clean water to remove loosened residues and detergent traces.

  5. 5.

    DRY AND INSPECT

    Finish with a clean, soft cloth and allow surfaces to dry. Inspect upholstery, seams and frequently touched areas for visible deposits, staining or signs of material deterioration.

THE GOLDEN RULE: DAILY CLEANING REMOVES CONTAMINATION. WEEKLY CARE HELPS PREVENT RESIDUE BUILD-UP.

Product information

the essentials.

The pre-soaked wipe format of the PlastiSept eco solution — ready-to-use, alcohol-free wet wipes for the cleaning and disinfection of sensitive surfaces of medical devices such as dental units (incl. upholstery and suspension tables), X-ray machines, instruments and acrylic glass. An instrument-grade, low-level disinfectant per the Product Information.

Key Features

  • Soaked with PlastiSept eco (ARTG 164389) — free of alcohol, aldehydes, phenols, QAC and halogen, so particularly mild to surfaces alcohol can damage.
  • Cleaning and disinfection in one wipe — no spray, no separate cloth.
  • Tear-proof microfibre “Cotton Touch” wipe, 50 g/m², extra large 21 × 26 cm — ideal for large surfaces.
  • After opening, wipes stay usable for at least 28 days if the dispenser lid is always closed tightly.
Composition
Soaking liquid: Dodecyldipropylenetriamine 0.2–1%, N-C12-14-alkyltrimethylenediamines 0.2–1%, deionised water, fragrances, emulsifying agent (PlastiSept eco, ARTG 164389).
Directions
Take one wipe and wipe the surface so it is completely moistened; let it act for the on-label contact time. Close the dispenser lid tightly after each use to keep the remaining wipes moist.
Field of application
Alcohol-sensitive surfaces of medical devices — dental units (e.g. upholstery, head rests), suspension tables, the X-ray area (e.g. chin rests at OPG) and acrylic glass (also solarium beds). Also usable by persons who react sensitively to alcoholic quick disinfectants. Application only by qualified personnel wearing protective clothing.
Clinical data & approvals
Contact times per the Australian Product Information (ARTG 293206): yeasticidal 1 min · bactericidal incl. MRSA 5 min · virucidal (Vaccinia, representing enveloped viruses) 5 min — with remanence effect. Expert reports: Prof. Dr H.-P. Werner, Schwerin (VAH 2014-05; EN 13624 + EN 13727, 2014-03; DVV carrier test against enveloped viruses, 2015-01) and Dr H. Brill, Hamburg (EN 16615, 2016-01).
Environmental
The active solution is biodegradable according to OECD guidelines; viscose-based wipe fibre.
Shelf life
2 years (unopened); at least 28 days after opening with the dispenser lid always closed tightly.
Delivery forms
REF 4625 — 2 tubs + 2 refill bags · REF 4624 — 12 refill bags. Wall holder REF 4602. Microfibre “Cotton Touch” wipe, 50 g/m², 21 × 26 cm.

Registered in Australia as ARTG 293206 (per the PlastiSept eco Jumbo Wipe Product Information). The Australian on-label contact times are shown above; the EN / VAH figures in the Evidence section are manufacturer / EU test data — in Australia follow the current Product Information.

Evidence

the evidence.

In Australia this product is listed on the ARTG as ARTG 293206 — the contact times below are from the Australian Product Information. The European test norms further down are manufacturer / EU test data (EN / VAH 4-field test), not an Australian therapeutic claim. The manufacturer summary names specific enveloped viruses; the site shows category terms only.

Australian Product Information (ARTG 293206)

ActivityContact time
Yeasticidal (e.g. Candida albicans)1 min
Bactericidal incl. MRSA (e.g. S. aureus, P. aeruginosa, E. hirae)5 min
Virucidal — Vaccinia (representing enveloped viruses)5 min
Remanence effect / preservationReduction of microbial recontamination

Manufacturer / EU test data

ActivityTested to
BactericidalEN 13727 · EN 16615
YeasticidalEN 13624 · EN 16615
TuberculocidalEN 14348
Virucidal (enveloped viruses)EN 14476 · EN 16777 · VAH

The full manufacturer scientific data summary (European testing) is available to dental professionals: see the documents below

Documents

docs &
downloads.

Need a document that is not listed? Speak to Biodegree — we supply current Product Information (PI), Instructions for Use (IFU), Safety Data Sheets (SDS, including hazard statements) and scientific / test documentation on request.

FAQ

common
questions.

What is PlastiSept eco Jumbo Wipe?

Ready-to-use, alcohol-free disinfecting wipes for the alcohol-sensitive surfaces of medical devices — dental units, upholstery and suspension tables, X-ray machines, instruments and acrylic glass. They are soaked with PlastiSept eco and are free of alcohol, aldehydes, phenols, QAC and halogen.

How do I use the wipes?

Take one wipe and wipe the surface so it is completely moistened, then let it act for the contact time in the current Product Information. Close the dispenser lid tightly after each use — after opening, the wipes stay usable for at least 28 days.

What packs and wipe size are available?

REF 4625: 2 tubs + 2 refill bags. REF 4624: 12 refill bags. Wall holder REF 4602. Microfibre “Cotton Touch” wipe, 50 g/m², 21 × 26 cm.

Are the wipes alcohol-free, and what are they made of?

Yes — free of alcohol, aldehydes, phenols, QAC and halogen. The soaking liquid is PlastiSept eco (alkylamine-based). This makes them suitable for alcohol-sensitive acrylic glass, upholstery and metal surfaces.

Is PlastiSept eco Jumbo Wipe registered in Australia, and what is the contact time?

Yes — listed on the ARTG as ARTG 293206 (CE 0123). Per the Australian Product Information: yeasticidal in 1 minute; bactericidal (incl. MRSA) and virucidal against enveloped viruses (Vaccinia) in 5 minutes.

What is the shelf life?

2 years unopened, per the Product Information. After opening, the wipes are usable for at least 28 days provided the dispenser lid is always closed tightly.

Sustainability

Fully biodegradable. Free from aldehydes and phenols.

Every Alpro formula is designed to break down and return to nature in diluted form — no aldehydes, no phenols, no chlorine, and no silver ions or metals in our waterline care. And every product is made in Germany, in an emission-free facility powered by solar and geothermal energy.

More about Alpro

What's next?

MaxiWipes

  1. PlastiSept ecoREF 3063-E · 5 L canister | REF 4645 · 500 mL bottle | ARTG 164389
  2. PlastiSept eco Jumbo WipeREF 4625 · 2 tubs + 2 refill bags | REF 4624 · 12 refill bags | ARTG 293206
  3. MaxiWipesREF · 4612 · 4613
  4. CleanWipesREF 4153 / REF 4154 · 70 wipes per refill · ARTG 282859
  5. IC-100REF 4659 · 5 L canister · REF 4658 · 500 mL foam spray bottle · ARTG 238325
MaxiWipes
Surfaces

MaxiWipes

REF · 4612 · 4613

Large dry wipes in the MaxiWipes-Box — for cleaning and disinfection with PlastiSept eco or IC-100.

Learn more

Get help

not sure what
your practice needs?

Tell us your setup and we'll match the right protocol, zone by zone.

Get help
  • Exclusive AU & NZ distributor
  • Source-verified documentation
  • Contact the Biodegree team

Customer service & support

help &
support.

Get help with your product, find the documents, or open the customer service portal.

Resource centre

Product documents and help, together.

Find resources, ask a question or prepare an enquiry. No account needed.

Disclaimers

  1. Efficacy, contact-time and composition figures are as stated on the manufacturer Product Information or in the cited study (manufacturer/study-stated) — verify before external or clinical use.
  2. Manufacturer approvals and equipment releases are as stated in the current Product Information; never mix Alpro products with another brand — it is not validated and can void the equipment manufacturer’s warranty.